Syndicate
HELP! I have problem with my Motorola V3C!
Well, the problem is that I have this Motorola V3c with the version GATW_X_01.0F.04P and eventually; I put this version VRZPR_E815_01.1E; and after I put the file in my Cellphone; The motorola isn't working, I try to turn on and It won't.
If there is a program that my cellphone could back to life??
Sorry to say friend, but it
Posted: Thu, 11/13/2008 - 21:02 by teddyearpSorry to say friend, but it reads to me like you haven't done enough research before you went ahead and messed with your phone. If I read it right, it reads to me like you tried to put a f/w file that was meant for the E815 on your V3c. You must NOT try to put f/w that is meant for one phone model on to another phone model.
Correct me if I read it wrong and good luck.
Click the image to the left to get to the imfamous 'Mickey Mouse Folder'
Also a VZW -> V3m flashed to Telus (as a V3c) and active on USCC's network
What was pyde's old sig? Yeah buddy, HELLO Java. . .
try putting the original
Posted: Thu, 11/13/2008 - 21:06 by listenman20try putting the original back on there....tehn read up on what file yuo need to put on there to get you where you want to be
I guees you are right
Posted: Thu, 11/13/2008 - 21:13 by AlexanderI guess you are right; that file was for the E815; because; here is the case; i have a friend who gave me their motorola v3c for me; and believe me i have done research and everything; I just put that file just to know if could change something but now i guess if not ; It doesn't work!!, but one part couldn't known was that the cellphone couldn't work after to that change. So sad for me.
I will not try to the same thing.
Another question is; Do you know where I can find this software?:
GATW_04.05.00R Verizon.
I just try
Posted: Thu, 11/13/2008 - 21:16 by AlexanderI just try to put the original back, but when I plug the cellphone in the USB ,doesn't recognize him. Believe me I just try few times.
it's bricked....IMO
Posted: Fri, 11/14/2008 - 05:34 by listenman20it's bricked....IMO
First off there is no such
Posted: Fri, 11/14/2008 - 06:26 by pyde_pypperFirst off there is no such flash ( ie GATW_04.05.00R Verizon) file for the VZW v3c that uses that number. The flash you had originally can be found here http://bushe102.googlepages.com/Moto_flash.htm
If I were you tho download and use the most recent Monster file VRZ_V3C_01.18.05P on it at this point.
Now seeing as the phoen will not get seen correctly have you tried putting the phone into bootloader mode prior to plugging it into your comp to flash it. To do so turn your phone off and pull the battery for a second. while the battery is out hold the power on key for 10 sec. Then put hte battery back in, but before powering the phone on hold down the * and # key at the same time, then while doing so press the power on key and it should put the phone into bootloader mode. you will see a blue screen on the lcd, if you do go ahead and try hooking it up again and flash it with the file I mentioned to see if you can bring it back to life. If not sounds to me like you have a nice expensive paperweight on your hands.
Currently using the New Moto Krave ZN4
______________________________________________________
Support our troop and piss on the rat bastards in D.C.