Syndicate
can't get bitpim to work for me on v3m
i have read through most of the guides and topics on this but still can't my filesystem up on it...what am i doing wrong? Need to delete a couple empty skin folders...
__________________
About thames28
Forum Navigation
Navigation
User login
Active forum topics
FREE WAP Server Status
Online and operating normally
To use the server you must enable WAP access on your account by going into the My account link on the side bar, going to Edit, then go to WAP, and then check the WAP access enable box and Submit.
To use the server you must enable WAP access on your account by going into the My account link on the side bar, going to Edit, then go to WAP, and then check the WAP access enable box and Submit.
hmmm...several things could
Posted: Fri, 10/10/2008 - 04:23 by listenman20hmmm...several things could be wrong. do you have filesystem selected under the view dropdown? if you see filesystem, did you double click on it? don't ask bitpim to find/detect the phone. manually set it up per directions and click ok. may be other problems but respond to these so we can rule a few out 1st.
Yes i have filesystem
Posted: Fri, 10/10/2008 - 06:26 by thames28Yes i have filesystem selected and have it set manually on com1 where motorola usb modem is at also as v3cm. i click on file system and bp goes to busy on bottom left of screen i can post the logs if that helps??
http://www.4shared.com/dir/9982434/1fba82d4/sharing.html
if all you need is filesysem
Posted: Fri, 10/10/2008 - 13:33 by spikejonesif all you need is filesysem access to delete folder, choose to connect as "other CDMA" with all other options set the same as currently. I think there may be an issue with connecting the Alltel phone as a v3cm. Try that and let us know.
....
Posted: Fri, 10/10/2008 - 13:36 by pyde_pypperShouldn't be an issue to be honest. I use that setting for my sons v3m that is running Alltel firmware.
however why not just select v3mm if running the newer version of BitPim. If you are only trying to access the filesytem you are better off using the actual phone model if it is listed.
Currently using the New Moto Krave ZN4
______________________________________________________
Support our troop and piss on the rat bastards in D.C.
oddly enough I had this same
Posted: Sat, 10/11/2008 - 06:26 by jerryriggoddly enough I had this same problem last night with a client's verizon v3.
I have (had) Bitpim 1.0.5- I just loaded the susteen drivers from my old data pilot and it let me into the file system, however it wouldn't with the motorola drivers.
hope this helps, Im pretty sure you can get the data pilot drivers just about anywhere.
Still no luck wouldn't bring
Posted: Sat, 10/11/2008 - 14:57 by thames28Still no luck wouldn't bring it up under v3mm or v3m or other cdma I don't know what else it would be...do i need to change any settings on phone? intall diff drivers??
http://www.4shared.com/dir/9982434/1fba82d4/sharing.html
what drivers do you have
Posted: Sat, 10/11/2008 - 17:57 by spikejoneswhat drivers do you have installed?
fyi: dont have msu or pst running in the background with this application.
i have the ones for the v3m
Posted: Sat, 10/11/2008 - 20:16 by thames28i have the ones for the v3m installed when i hooked it up, then what ever drivers installed for MSU and MPT P2K and BP in pretty much that order install. I have been running BP by itself....been trying to make sense of my logs but i haven't gotten them figured out yet on what might be wrong
http://www.4shared.com/dir/9982434/1fba82d4/sharing.html
I haven't totally reviewed
Posted: Sat, 10/11/2008 - 20:28 by teddyearpI haven't totally reviewed this thread like I usually do, but I had a bit of trouble with bitpim recently. I kept getting a bunch of errors even before the phone detection screen. I solved this by deleting the bitpim folder in my 'my documents' folder. That is what worked for me and sorry if this info is irrelevant.
Click the image to the left to get to the imfamous 'Mickey Mouse Folder'
Also a VZW -> V3m flashed to Telus (as a V3c) and active on USCC's network
What was pyde's old sig? Yeah buddy, HELLO Java. . .
teddy i think your issue is
Posted: Sun, 10/12/2008 - 03:25 by spikejonesteddy i think your issue is a bit different and I think it has to do with the bitpim database becoming too large, or something like that. Ive seen something along those lines in the bitpim user mailing list.
as per installing MPT after the drivers, that may be a cause of your problems. MPT should be installed first since the drivers that come with it cause errors with other applications. if i was you, i would uninstall all drivers as well as MPT, then run a registry cleanup. Then reinstall MPT first, followed by MSU, and finally the driver package from MotoDev. that is a more proper way to do things since the drivers from motodev are the best ones.
when you install MPT last, those drivers take over and screw things up.